Rails and cable management of Dell PowerEdge R760

Here we introduce you rails and cable management information  of Dell PowerEdge R760—sliding rails and static rails.

The rail offerings for the PowerEdge R760 consist of two general types: sliding and static. The cable management offerings consist of an optional cable management arm (CMA) and an optional strain relief bar (SRB).

Static rails

The static rails (shown in the figure below) support a wider variety of racks than the sliding rails, but do not support serviceability in the rack. The static rails are not compatible with the CMA and SRB.

B4 Ready Rails Static Rails for 4-post & 2-post Racks:
● Supports Stab-in installation of the chassis to the rails.
● Support tool-less installation in 19 inches EIA-310-E compliant square or unthreaded round hole 4-post racks including all
generations of Dell racks
● Support tooled installation in 19 inches EIA-310-E compliant threaded hole 4-post and 2-post racks
● Support for tooled installation in Dell EMC Titan or Titan-D rack

Static Rails

Sliding rails

The sliding rails (shown in the figure below) allow the system to be fully extended out of the rack for service. The sliding rails
have a CMA and a SRB option. There are two types of Sliding rails available in 15G, ReadyRails II sliding rails and Stab-in/Drop-in
sliding rails.
B6 ReadyRails™ II sliding rails for 4-post racks:
● Supports Drop-in Installation of the chassis to the rails.
● Support for tool-less installation in 19 inches EIA-310-E compliant square or unthreaded round hole 4-post racks including all
generations of Dell racks.
● Support for tooled installation in 19 inches EIA-310-E compliant threaded hole 4-post racks.
● Support full extension of the system out of the rack to allow serviceability of key internal components.
● Support for optional cable management arm (CMA).
● Support for optional strain relief bar (SRB).

  Sliding rails with optional CMA

● Supports Drop-in or Stab-in installation of the chassis to the rails.
● Support for tool-less installation in 19 inches EIA-310-E compliant square, unthreaded round hole racks including all
generations of Dell racks. Also supports tool-less installation in threaded round hole 4-post racks.
● Support full extension of the system out of the rack to allow serviceability of key internal components.
● Support for optional cable management arm (CMA).
● Support for optional strain relief bar (SRB).

Sliding rails with optional SRB